Unboxing the new Lumibricks/FunWhole F9022 Lookout Campground Building Block Set

 

Hi Brick Fans,

Today we will do an unboxing of the new FunWhole Lookout Campground Set.  The set number is F9022 and it has 1426 pieces.  It was newly released around October 2023.  This is a very unique looking set that I haven't seen anywhere else before.  I especially love the silver camper parked in the front of the watch tower.  It's a really idyllic looking scene with a nice campsite by the water's edge.



FunWhole has kindly provided this set for my review.  Thank you!  
This blog post will take a look at what's included in the set.  I will do a separate blog post that will review the building of the set and I'll give you my final thoughts.

What's in the Box?


Every Funwhole set comes with a beautiful, sturdy box.  All of the contents are well protected and organized.

The Lookout Campground set contains one sticker sheet.  Not sure if there will be any printed parts yet.

There are bags of parts numbered 1 through 10, so it looks like there will be 10 corresponding sections in the manual.  I also got a bag of hoses (as labelled), a bag marked F that contains pieces for the three minifigures included in the set and also a bag of baseplates.  There are three bags labelled number 1.  The rest of the numbered bags follow.









I counted a total of 26 bags of parts.

A Quick Peek at the Manual


The manual  (or should I call it a book?) is huge!  It has over 252 pages, and that's not including the first 3 or 4 pages of introduction and separate detailed instructions on how to use the light kit. (more on that later).


Some really nice artwork on the first pages of the manual.

I just opened up a sample page frpm the manual so you can see how it looks.  The pages are all very crisp and the colors look on point.

The Lighting Kit


As per the FunWhole motto, their sets provide Delight Day and Night.  That means that each and every FunWhole set comes with an LED light kit.  This is how FunWhole differentiates itself from other Lego compatible brick brands.

The seal on the box indicating the set number F9022 looks very official.

Upon cracking open the light kit box, we find some familiar items.  If you have built other FunWhole sets you will know you always get a set of quality tweezers and a battery pack.  Funny though, I don't see a brick separator packaged here.  Maybe it will be in one of the other bags.  There are two oranges pouches that contain the lighting components.

In pouch 1, we find an 8 port expansion connector board, a USB plug and a wire with approximately 3 lights attached.

In pouch #2, we get a led light strip, and several led lights on wires.

In reviewing the box art and manual, we can see that the Funwhole Lookout Campground set consists of a tall watchtower and parked in front of it is a silver camp trailer.  There is also a large tree and even an outhouse!    From what I can see, the inside of the watchtower is lit up as is the outhouse.  There are a couple of shining lanterns and an open fire on the grounds of the campsite.  I think this is going to be a really fun build.   I think this set will nicely complement the other Funwhole sets such as the Wood Cabin and the Lakeside Lodge.

Here are my reviews for those two sets, if you are interested to know what they are like.



You can find the Campground set on the Funwhole Website or on the FunWhole Amazon store.
 BTW, if you use my special promo code itsnotlego, you can save 10% on your entire purchase from the FunWhole website.

Look for my full review coming soon!  Thanks for stopping by!



Sillbird Hurricane Dragon B778 Stem Toy Building Block set Review


Hello brick builders!  We are back again to take a look at another Stem Toy from Sillbrand!  If you saw in our last post, we took a very close look at the Sillbird WallRobot 4-in-1 Stem Toy.  This time we will look at Sillbird's B778 Hurricane Dragon.

Thank you Sillbird!  My set arrived superfast, like within a matter of days and it came with the original box too!

Let's take a look at all the info on the box.  The set is called Hurricane Dragon Remote & App Control Building Blocks.  It's age rated 8+,  with 549 pieces.  The toy is rated as one of the Top 10 STEM projects in 2021.




The 72 page manual is clear and concise with easy to follow steps.  Please note that the instructions are not divided into different sections.  There is a parts list at the end of the manual and instructions on how to use the remote controller.


There are 9 different bags of parts, however there isn't any correlation between the numbers on the bags and the manual. As I mentioned previously, there aren't any numbered sections in the manual.   I don't know if this helps anyone, but I made a list of where in the manual each bag of parts was used.

 Bag #   Step #   Page # 
 1   1-28   1-7 
 2   29-49   8-16 
 3   50-71   17-24 
 4   72-102   25-33 
 5   103-135   34-42 
 6   136-167   43-49 
 7   168-198   50-57 
 8   199-224   58-65 
 9   225-241   65-70 


Here's all of the other stuff in the box.

The sticker sheet.  I don't like to use too many stickers, so for the dragon set I only used the eyes.

The wings are printed on an acetate sheet which you can easily remove.

This is the motor.  It serves as the main torso of the dragon to which all other brick parts are attached to it.

And this bag contains the remote controller and USB charging cable .

The Build


Since the manual isn't divided into different sections, you just keep building it until you are done.

The steps in the manual are very easy to follow.   Each step is just adding one or two pieces.


Here's a progress picture.  Most of the dragon's body is complete.

Added the legs and feet.

Time to build the dragon head.

Here's a look at the multi-jointed tail.

Putting the head and tail onto the dragon.

Now working on the wings. I could only fit 3 out of the 4 holes in the wings to the wing structure.

Clipping the wing to the body.

Things for improvement

There were a couple of deficiencies I noted after assembling the Hurricane Dragon.  None of them were show-stoppers but they bugged me enough, that I wanted to fix them.

Issue #1: Hind Legs Dragging

I'm confident I stuck to the manual's instructions precisely, but upon completing the dragon build, I noticed the hind legs were a bit loose. When maneuvering it with the remote, the hind legs lacked strength and were more of a drag. While you can tweak the legs for a solid display stance, unfortunately, they don't provide ample support when the dragon is in motion.

My fix for this problem was to install a long technic pin locking the hind legs to the body in a permanent upright position.  The technic pin I used was 8 studs in length and fastened in place with a technic nut.

Issue #2: Drooping Neck and Head 

From steps #1 and #2, here is the attachment point for the head and neck to the body.  It is loose when built as per the manual, therefore there is no support for the weight of the head.   See the blue arrows.


I went into my brick stash and found a special brick that would keep the two socket holes locked into an upright position.   The piece I used is quite specialized.  I don't know if there is another solution that can use more common bricks to achieve the same purpose.  If anyone knows, please let me know in the comments below.

To support the new piece, I also had to make minor adjustments to the spine somewhat to hold the new part in place.   With my fix, the head stays locked in an upright position now.   With those two minor issues resolved, it's time to use the remote controller to play with the dragon!

Operating the Dragon

First you need to power on the motor, locate the switch near the bottom of the gray unit.  When you move the switch to the On position, a blue light will turn on.

To charge the motor, use the provided USB cable.  The charging port is on the opposite side of the gray unit.

The Dragon is operated via the remote controller or via an App you can download.  I just used the remote controller for the purposes of this review.   Sillbird provides a small screwdriver which is very handy as it opens up the battery compartment for the remote controller.


Just a heads up, the set doesn't come with batteries, so you'll need to grab your own. It takes two AAA batteries. Oh, and a little reminder to pop that door back on the compartment and give the screw a good tighten.

The remote controller is equipped with buttons to maneuver the dragon forward, backward, left, and right.

 Stay tuned – I'll be whipping up a video of the dragon in action soon.


 The dragon head looks especially ferocious with it's scary eyes and menacing jaws.

Some of the features of the dragon include, moving tail, moving jaw and moving wings.

I used Canva to make a Youtube thumbnail.  Look for a video coming soon!

Final Thoughts


The Sillbird Dragon kit is ideal for those venturing into their first technic-style building block set. The instructions are straightforward, making it easy for beginners to follow, and the part count strikes a good balance—enough to challenge but not overwhelming.

Both younger and older kids will enjoy the interactive element of using the remote control to operate the dragon. Imagine the dragon becoming a captivating addition to a medieval-themed display.

In terms of value, the set is reasonably priced, considering it includes a robotic set with a remote controller.

However, there is room for improvement in the head attachment and hind leg attachments to prevent them from flopping around.

Recommendation


I'll give this cool set a 3.8 stars out of 5 and rate it a recommend.



Summary

  • Set Name: Sillbird Hurricane Dragon
  • Set Number:  B778
  • Piece Count: 549 pieces
  • Age Rating: 8+
  • Experience Level: Beginner to Intermediate
  • Instruction Manual: Included
  • Brick Separator: Included
  • Stickers: Yes
  • Printed Parts: No
  • Minifigure:  None
  • Lighting Kit: No
  • Remote Control: Yes (batteries not included)
  • Retail Price: approx $55 USD


Where to get the set



Use code 10GWU5MN to get an extra 10% off!



Thanks for looking, see you next time, Bye!